×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

DNIS Question

DNIS Question

DNIS Question

(OP)
Okay, I promise I am figuring out a lot of stuff on my own, and will eventually stop asking so many questions.

I have a customer with 3 Digital Trunk Modules.  2 have incoming PRI's, and 1 has a T1 line going out to an external fax server.  The customer had their service provider change the local number that an 888 number pointed to and the DNIS that is sent when that 888 number is dialed.  I cannot find where in the BCM I have make changes to make this number properly route to the fax server.

Thanks to everyone that has helped me already.

RE: DNIS Question

DNIS numbers are programmed under target lines ...and they must(will) be unique

RE: DNIS Question

I think the DNIS you are taliking about is in the call pilot. But you have to have the call center pro keycode to use this.

I am not 100% about what you are trying to achieve but if it is to take a number ending 888 and send it accross your T1. You could program the Target line and assign it to ring an unused extension.Then under the target line trunk line data at the redirect to put in the access number for the T1 and the fax server number.

Hope this makes sense.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close