×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

2000 IVS (2) down

2000 IVS (2) down

2000 IVS (2) down

(OP)
I have a NEC 2000(2)down. When I got on site the 8 port co card was flashing. I installed backup but when I do a reset co's start flashing again. In cmd E5 co's ok and cmd10 trunks are assigned.
What do you think is going on??  
 

RE: 2000 IVS (2) down

i take it you are backing up before a restart ???

RE: 2000 IVS (2) down

You may need to reload your base software again.  I have seen that before when I only had 48 port software loaded and I had a card in a slot past the 1st 48 ports.  Atleast I think that is what was happening. You may only have to load your software keys loaded in f80>01,02,03,etc

RE: 2000 IVS (2) down

Back to basics, have you actually got dial tone on these circuits? What ever brought down your system may have affected other services. Sorry if this is obvious but I once talked a guy through 30 mins of checks only to find he didn't have the equipment turned on.

RE: 2000 IVS (2) down

Which LT slot is this CO card in?

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close