use the "answer dn" feature

or the hunt groups

ski season has started

WIll the hunt group or answer dn, work on 2 differant BCM's at 2 differant locations>

who knows ...try it thats what bcm's were for

ski season has started

these answers are from another forum i ama member of


Yes, if the set at the remote site is an IP phone registered to the BCM at the main site.


Can we make two phones, at two sites, on two BCM's ring simultaneously from the same DID/Target Line?  Maybe, but I've never tried.  I'm wondering what would happen if we used two sets(A & B) at the main site, one target line A/R on both sets.  Hard call forward set B to the DID for the set you want to ring at the other site.  Don't know if the call would continue to ring on set A at the main site, but I'm thinking it would ring both sets until one of them answers.
 
Randy  

ski season has started

Pbxn

How are the systems networked?

Connected via IP through our network. All dn's tie into my option 61. In the option they are cdp'd out to their respective routes

If you put the incoming DDI number in to the call routing and send this to the remote site. Then program the target line with that DDI and associate it to the extension.

On the first site if you program up as normal DDI with target Line and see if both ring.

not sure might just reject call

I will have a play with some kit in the lab and let you know if I can come up with anything.

But as luv2ski said the call forward thing should work.But not really marp.I do not think nortel had marp in mind for the BCM.

Thanks for the replies, this is a little pita to figure out.

Are these ext's on the same BCM? what are you trying to do?

Two seperate BCM's, that share the same extension, at both locations.
Ring at both locations, so person does not have to fwd location a phone to location b phone.

OK I understand what your trying to do , But I don't know the answer.  Sorry