×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

DSS

DSS

(OP)
I can not transfer any calls from my dss,I can see when someone is off-hook. I have reset the dss and checked all programming and all seems to be fine, any help appreciated.My switch is a 2000ivs2.

RE: DSS

Is your DSS associated with the correct Dterm in CMD 96?

RE: DSS

(OP)
Yes Sir.

RE: DSS

Wayne

taking this and the problem you are having with the 32 key phone I will first ask if these are on the same card. If they are try swapping the card also a system reset (back up that data first though). Beyond this without hands on I am currently running out of possibilities.

Did this just start to happen or did it follow any other changes?

RE: DSS

Can you pick up your handset and push a key on the DSS and ir call that person?

RE: DSS

(OP)
No to both dontworx and ozziegeorge.

RE: DSS

(OP)
The trouble I am having with the dss is on another 2000ivs2 switch.I can see when someone is off hook but I can not transfer any calls any where no matter which way I try.I have unplugged, reset ,etc.....no transfer. Switched cards and replaced dss,nothing.Thanks

RE: DSS

I would go through everything from the start
Check cmd 10 make sure if it is in pim 0/1 you assighn it as E100-E107 if pim 2/3 E108-E115 and so on.  Then make sure it is assighned in cmd 96 to the correct extension and then the button mapping in 97 and that is it.  If you have done that what Kind of card are you using and 8-dlcp or an 8-dlcl?

RE: DSS

(OP)
We have done everything that we can come up with but still no go.I'm sure it has to be something  in programming that is the culprit,everything else has been done twice and even three times gone over.I will continue to look into this problem and will let it be known what it was to all interested.Thanks for all the help.

RE: DSS

What PIM is the DSS Console Connected to and what do you have then programmed as E1XX?

Thanks,
Chris

RE: DSS

The reason I asked what card you are using is becouse their is a change that has to be made with the 8-dlcl

RE: DSS

(OP)
Pimm 0,E100 is on lens 006.I will have to check in the morning what card it is,that card did not sound familiar.Thanks.

RE: DSS

(OP)
8dlcp

RE: DSS

IP,

Is on the right track but what pim is the station in that the DSS is associated on?

RE: DSS

(OP)
pim 0

RE: DSS

Oh wait did you recently upgrade this IVS2?

RE: DSS

(OP)
Nope,nothing has changed since it was installed 4 years ago.

RE: DSS

When you say it is another switch, Do you have a remote pim going on or is it a CCIS arrangement?

RE: DSS

I give up!

RE: DSS

This is a known issue where any type of software upgrade can cause the loss of the DSS function but still allow the BLF portion.
The only way I know to clear this is to back up the data base, B load the MP and then re-load database.
Once again I have seen this many times but NEVER just out of the blue like this. It has always been after some sort of software upgrade to the MP or an attempted upgrade.

RE: DSS

What did you mean when you stated: "The trouble I am having with the dss is on another 2000ivs2 switch"

RE: DSS

(OP)
What we have are 47, 2000ivs2 switches through out our school system,I have one that the DSS does not transfer calls,BLF works fine.We have one 2400 IMX as the heart of the whole Telco system.

RE: DSS

Do you guys not have a reputable NEC Dealer that you can call?  I would recomend doing that.  

RE: DSS

(OP)
VICTORY

RE: DSS

What was it?

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close