Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Panasonic KXTDA-30

Panasonic KXTDA-30

Panasonic KXTDA-30

Has any one sucesfully installed centrex style lines from an Analogue extension port off the TDA.
It works but seems to lock up the lines.
Replies continue below

Recommended for you

RE: Panasonic KXTDA-30

I do not understand your post?

RE: Panasonic KXTDA-30

Well in short is their any way round Analogue CO-CO trunk lock ups?

RE: Panasonic KXTDA-30

Are you  saying that you have connected 2 CO lines together?
if so, then the manner in which this was done will affect the way to disconnect

RE: Panasonic KXTDA-30

Right, let me say for example that I have 2 analogue lines 01234 567891 line 1 comes in and this call forwards over line 2 to mobile 07123 456789.

What can be done to stop the line lock up after the caller/called has hung up?

Have tried with newest sw upgrade this week but still getting CO line keys remaining on.

RE: Panasonic KXTDA-30

you are not receiving disconnect signal from your C.O.
there is a stand alone product that will create a cpc
siginal if your can not get cpc to work!!

RE: Panasonic KXTDA-30

CWC,-------Can you give me some info on the CPC device your referring to ,,,,,,,,,,,,,,,thanks

RE: Panasonic KXTDA-30

Shall look into this.
Thanks CWC3

RE: Panasonic KXTDA-30

Panasonic are now producing Analogue line cards with cpc detection built in, I believe the earlier versions did not have cpc capability. Go into trunk settings and set cpc to the required level.

RE: Panasonic KXTDA-30

Or you could go to your trunk group settings and put a timer on the call so it'll drop out after a set amount of time.  Enable in COS settings after timer is set..

RE: Panasonic KXTDA-30

The timers in the TRG were left at ten minutes and this caused problems also. Had a word with Panasonic Tech support. Now in our case they had said as they supplied the card they will now supply us with the newer LCOT with CPC settings so hopefully all will be well.

RE: Panasonic KXTDA-30

Either that or get the Line provider to change the CPC timer. This seems to have resolved all our issues.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close