Remote Login Problem
Remote Login Problem
(OP)
While dialing remotely into a BCM, with correct passwords and settings, the PPP on this one particular system is requiring a domain name. This unit is not connected to any computer network. I cannot proceed unless I have provide a domain name. Trying to trick the system does no good. Anybody have this problem before and can share their solution would be greatly appreciated.
Thanks,
Soop
Thanks,
Soop
RE: Remote Login Problem
1. Try to use the BCMs hostname as domain name when dialing into the system.
2. Check dial-up settings on your pc. Maybe "Use domain logon" or somethin like that is checked.
3. Change the workgroup name of the BCM
RE: Remote Login Problem
RE: Remote Login Problem