Has anyone tried to build a trunk between a Definity G3Si and a Zultys MX250. I am looking to place a handful of IP phones in a remote location, bring the call back to the definity via a trunk. The zultys will pass digits to the definity and all outbound calls will route thru the definity...so we can leaverage out dedicated LD calls. HELP
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Zultys IP PBX
- Thread starter gobuffs
- Start date
Similar threads
- Locked
- Question