After about a week and numerous long calls to LinkSys support I am nowhere. I am truly amazed how inapt both level 1 and 2 support are. I can connect the tunnel (router confirmed) but am unable to use it. All computers are in a work group. I have static IPs in both routers and all addresses are assigned, i.e. DHCP is out of the picture. I expected a vanilla setup like this would be a no-brainer, but alas! I suspect a port problem? All firewalls are down. Has anyone had any success doing this? I will not call tech support again and this is my last chance before I deposit 2 WRV54G routers where they no longer can do harm! From reading this form, the real solution appears to be the RV082, any thoughts on this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
WRV54G to WRV54G VPN Tunnel Setup Problem
- Thread starter LWBSCC
- Start date
Similar threads
- Locked
- Solved
- Locked
- Question