Withholding number on a SIP Line

[VoiceonData]

Im having difficulty with withholding a number on a SIP line

i have a short code
?
.W
Dial
50:Main

and a ARS (50 Main)

N
NW"@IPAddress"
Dial
10

line group 10 is the sip


Yet it still displays the number when you dial out

any clues ???



voiceondata

http://www.voiceondata.co.uk

 

[hairlessupportmonkey]

perhaps your ITSP is sending the wrong field out the the PSTN network.....

 

[amriddle01]

That function needs to be supported by the providor too

ACSS (SME)
APSS (SME)

http://www.ipoffice.tel

 

[kwing112000]

I didnt think you could control caller ID from the ARS with SIP trunks. If you can your codes are wrong. it would be sW not just W

Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries

 

[Bas1234]

try adding a SIP uri called anonymous on all three "user data" pulldowns. the "W" is only supported on SIP for R6+ It could be that it works on 5.0.20

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________