Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Wiring Speakers
- Thread starter beybros
- Start date
TouchToneTommy
Vendor
Are you using the 70-Volt output, or the 8-ohm output?
- Thread starter
- #3
TouchToneTommy
Vendor
Then you just need to get speakers that include the 70-volt matching transformer, and you can extend the wiring from the existing speakers to the new ones. Just connect them in parallel (like daisy-chaining phone jacks in the old days). Set the transformer tap to a wattage that will give you a volume level appropiate for the speaker location, and be sure that the total of all the speakers does not to exceed 80% of the amplifier's wattage rating.
Some helpful info can be found here:
(look at the bottom in the section called "Related Charts")
Some helpful info can be found here:
(look at the bottom in the section called "Related Charts")
- Status
