wireless network

[Manic]

does any one know of a comprehensive list of available mix and mach??

We currently have a LAN (netgear) and we have a sony projector with WLAN.

The projector recomends the cisco Aironet 350 pcmcia card and we alredy have a ME102 (netgear) access point.

Will these work together or is there another combination I could suggest to my boss.

I have alredy suggested to use the Aironet 350 pcmcia and AP. but the price of the Aironet 350 AP put him off a lot (nearly £400).

Thanks in advance for any help.

Manic
-----------------------------
I've broken it again !!
-----------------------------
lee.gale@virgin.net

 

[edfair]

I've mixed and matched Siemens, SMC, and LinkSys with fairly good results when I got past the DOA issues.
But you may want to keep your parts from one manufacturer, it saves the time involved with the "finger pointing" when you deal with support. Ed Fair
unixstuff@juno.com
Any advice I give is my best judgement based on my interpretation of the facts you supply. Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.

 

[Manic]

I know, but it is a nightmare trying to convince management that we need to spend the £££ if you want something to work.

thanks for the tip tho.
Manic
-----------------------------
I've broken it again !!
-----------------------------
lee.gale@virgin.net

 

[Manic]

managed to get it all sorted in the end. After a lot of hair pulling and ranting.

thanks for the help ed Manic
-----------------------------
I've broken it again !!
-----------------------------
lee.gale@virgin.net