Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Windows Nt 4 Windows 2003 interoperability

Status
Not open for further replies.

Vic88

MIS
May 29, 2000
76
JM
I have a windows nt 4.0 domain call jas with a domain controller called jas-1. I recently setup a windows 2003 domain call mpc with a domain controller called mpc-1

Whenever I ping jas-1 from the win 2k3 domain, the address resolved to jas-1.jas.com. However, whenever I ping mpc-1 from the nt domain, it resolved to mpc-1.jas.com. I suspect that this is caused by the dns server but I cannot correct the problem.


Also, I am able to configure the trust from the windows 2003 server. However, whenever i try to setup the trusted domain on the windows nt server, the error message "cannot find the domain controller for this domain is obtained. The RestrictAnonymous value was set to 0 and the server restarted but this still occur.

Any suggestion will be highly appreciated.


Vic88
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top