Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Windows 2000 Network Security Tips?

Status
Not open for further replies.

wardog25

Technical User
Joined
Oct 24, 2003
Messages
129
Location
US
I was wondering if I could get some tips on how to improve security for my Network.

All my servers are 2000 servers, and I have only one subnet and one domain. I have a router running NAT for internet access, but no firewall beyond that.

At this point we have no in-house web server or email server, so there are very few opportunites for hackers.

I'm just curious, what is my biggest vulnerability? Is it that I have no firewall on the router? What are the chances a hacker would break through that? And even if they did, what could they access? All private information is contained on windows 2000 servers. If a hacker got through the router, wouldn't they also need a username and password as well?

Anyway, I'm just wondering what security aspects are best to concentrate on and spend money on.
 
I would say that your biggest problem is no firewall. It especally bad is you have a public ip address.

I'm not a hacker so I don't know exactly how they can get into your systems but without a firewall they definately can. There are programs that can be run to obtain information about your servers/router.

I would at the very least buy a router with a built in firewall. Even a low end SonicWall or WatchGaurd would work ($600). These devices have built in firewalls...

Then I would just make sure that my Windows servers and domain has good password policies and security policies applied (free).

In general, these two steps are good enough for small environments...

-later



Joseph L. Poandl
MCSE 2003

If your company is in need of experts to examine technical problems/solutions, please contact (Sales@njcomputernetworks.com)
 
A firewall would be good but most routers offer nice basic firewall features anyway.

Your risk is the users having uninterrupted access to the Internet which leads to a flood of spyware and other crap. I would look to invest in a proxy/firewall.

For something simple and free get yourself Smoothwall. All you need is an old P2/400 with some disk space and you should be able to set up a proxy server and firewall in about 30 minutes.

On the LAN - get a decent updated antivirus package - not recommending any as they all pretty much do the same thing.

For your servers - get a decent security hardening book and apply it's knowledge to your servers.

That's a pretty good start.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top