bcharlippc
Technical User
I am involved with a single pc running Windows 2000 and need to print from DOS programs. I have tried using the net use command, but receive a 67 error. Any suggestions?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Windows 2000 DOS Printing
- Thread starter bcharlippc
- Start date
- Status
GlenJohnson
MIS
I'm converting from novell to w2k and I have the same problem, I need to print from dos. Here's what I use.
net use lpt1 servername\printername In your case, I would think it's net use lpt1 printername. Make this a batch file, and throw it in your startup. Whenever the pc comes up, it'll grab that port. You may get an error message about lpt1 already in use, just ignore it. Good luck. Glen A. Johnson
Microsoft Certified Professional
glen@nellsgiftbox.com
![[americanflag]](/data/assets/smilies/americanflag.gif "[americanflag] [americanflag]")
"A person often meets his destiny on the road he took to avoid it."
Jean de La Fontaine (1621-1695); French poet.
net use lpt1 servername\printername In your case, I would think it's net use lpt1 printername. Make this a batch file, and throw it in your startup. Whenever the pc comes up, it'll grab that port. You may get an error message about lpt1 already in use, just ignore it. Good luck. Glen A. Johnson
Microsoft Certified Professional
glen@nellsgiftbox.com
"A person often meets his destiny on the road he took to avoid it."
Jean de La Fontaine (1621-1695); French poet.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
