TRONIC1
Technical User
- Dec 23, 2004
- 209
Hello all,
I have a customer asking if MDMF gets passed on both trunk interfaces. Apparently there's a bill coming into play as of Sept.30 requiring this (C-37). Just so you have all the info...
My customers question:
I would like to know if the IP Office products support the MDMF Caller ID feature?
Descriptions of this feature:
There are two types of caller ID, number only and name+number. Number only caller ID is called Single Data Message Format (SDMF), which provides the caller's telephone number, the date and time of the call. Name+number caller ID is called Multiple Data Message Format (MDMF), which in addition to the information provided by SDMF format, can also provide the directory listed name for the particular number.
In Canada, there is a new bill (bill C-37applicable on September 30th, 2008) that force certain of our customers to publish their name AND their phone number.
If it is not supported by the product presently, can you please tell me when a patch or a new release will support it?
Thank you.
Avaya's response so far:
MDMF is what we normally see here in the United States where you are provided
Calling Name and Calling Number.
Tested this with the ATM4 cards.
Tested both SDMF as well as MDMF.
If they are talking about some other integration outside of Analog trunks then, not sure if there is any offset that we need to look at to see what is currently presented here in the United States.
Does anyone have any further information concerning this? Any advice, info or assistance would be greatly appreciated.
"Hope for the best, plan for the worst
I have a customer asking if MDMF gets passed on both trunk interfaces. Apparently there's a bill coming into play as of Sept.30 requiring this (C-37). Just so you have all the info...
My customers question:
I would like to know if the IP Office products support the MDMF Caller ID feature?
Descriptions of this feature:
There are two types of caller ID, number only and name+number. Number only caller ID is called Single Data Message Format (SDMF), which provides the caller's telephone number, the date and time of the call. Name+number caller ID is called Multiple Data Message Format (MDMF), which in addition to the information provided by SDMF format, can also provide the directory listed name for the particular number.
In Canada, there is a new bill (bill C-37applicable on September 30th, 2008) that force certain of our customers to publish their name AND their phone number.
If it is not supported by the product presently, can you please tell me when a patch or a new release will support it?
Thank you.
Avaya's response so far:
MDMF is what we normally see here in the United States where you are provided
Calling Name and Calling Number.
Tested this with the ATM4 cards.
Tested both SDMF as well as MDMF.
If they are talking about some other integration outside of Analog trunks then, not sure if there is any offset that we need to look at to see what is currently presented here in the United States.
Does anyone have any further information concerning this? Any advice, info or assistance would be greatly appreciated.
"Hope for the best, plan for the worst
