Who's logged in?

[contsi]

What is the command to see who is logged in a Netware 5 Server?
Thanks

 

[TheLad]

There are several ways of doing this but the easiest way is from the server console using MONITOR.NLM

-----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------

 

[contsi]

Thanks for your help, I ran it trough "rconj".
I have several Neware servers that I have to look after and run administration from, but my knowledge of Novell is limited. Can you recommend a comprehesive document with these commands and what they do? Also, I woud like to run the Groupwise tools on "Console 1", How dificult is it to load?
Thaks again.

 

[terry712]

to install the groupwise snapins on pc is straight forward.

you will have a software distribution directory for the system or if you dont then you can get it from novell's site

run the groupwise setup - on the first page you will get 4 tick boxes - just select the admin part - something like console 1 snapins - it will ask where your console1 is - normally c:\novell\console1 say ok and thats it

map adrive to domain - and thats it you'll see the system

 

[albertman]

Check Coolsolution from novell site.

There is a utility calld Zedmon. It is excellent and must-have for netware admin.