Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Whether SNMP v3 is spported in CS1000E systems?

Status
Not open for further replies.
shanpri

shanpri

Programmer
Joined
Sep 29, 2011
Messages
6
Location
EU
Hello team,


Customer Requested to Configure SNMP in Rls 6 Cs1000E systems, The NMS tool is used by customer is Solar Wins Orin 10.2 which Supports SNMP V3 and V2.

Can you please tell whether SNMP V3 or V2 is supported in Our Nortel PBX?

Thanks.,
San,
 
Sort by date Sort by votes
I believe it is SNMP V2...take a look at this NTP...NN43001-719
 
Upvote 0 Downvote
Thanks!!!... In document it mentioned "SNMPv1 and SNMPv2 are supported for querying elements on the network, SNMPv1 is
supported for trap generation, and SNMPv2C is supported for the MIBs. "

Which means only V1 and V2 is Supported correct?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

akak247
  • Question Question
Cs1000e 7.6 blind transfer not working
Replies
1
Views
142
merton888
M
km9v
  • Locked
  • Question Question
Decommissioning CS1000E/B
Replies
2
Views
465
bignose21
bignose21
BCU
  • Locked
  • Question Question
Caller id is not getting displayed
Replies
3
Views
843
gbtac3
gbtac3
pook9924.
  • Locked
  • Question Question
Port is out of service - port is in service - No carrier detected
2
Replies
21
Views
2K
Firebird Scrambler
Firebird Scrambler
motox2
  • Question Question
Callpilot App Builder Player issues
Replies
1
Views
201
gbtac3
gbtac3

Part and Inventory Search

Sponsor

Back
Top