What PRI am I using? 1

[atverre]

I want to check what PRI I'm using when I'm making a call. And the best way to do this is?

 

[mikeyb123]

when you are on a call, go to LD 80 and do a trace.

ie

trac 0 xxxx where x is you extn number


this will return something like this:

.trac 0 6884

ACTIVE TN 008 0 01 03
ORIG 008 0 01 03 0 SCR 0 6884 2616
TERM 1 31 IDA RMBR 110 240
DIAL DN 907952687382
MAIN_PM ESTD
TALKSLOT ORIG 27 TERM 5
EES_DATA:
NONE
QUEU NONE
CALL ID 240 2210

the TERM gives me the TN for the PRI loop

It's not getting any smarter out there. You have to come to terms with stupidity, and make it work for you.

 

[johnpoole]

another way is to put the call on hold and pick it back up. that tells you the acod of the route and the member number. back in the day of analog trunks, i had customers that would do that to help me locate a noisy trunk in an analog group.. ld 21 prt rdb, make a list of your access codes. then from any display set you can id the route and member. ld 80 from the switch is more detailed, when your in the switchroom

john poole
bellsouth business
columbia,sc