Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

What parts are hot swap Cisco 6509 and 6513?

Status
Not open for further replies.
burtsbees

burtsbees

Programmer
Jan 29, 2007
7,657
US
Can anyone tell me what parts are and are not hot-swappable in the Cisco 6509 and 6513? I know the GBIC is hot-swap, but what about the supervisory engines, ethernet cards, power supplies, etc?

Burt
 
Sort by date Sort by votes
Pretty much everything in 6500 is hot swappable.. supervisors are as long as you fail them over to a backup supervisor..
 
Upvote 0 Downvote
Everything except the backplane is hot-swappable on the 6500 series - Fan Tray, PSU's, Supervisors, linecards etc. Some of the Service Modules (FWSM, IDSM) should be shut down cleanly before hot-removing. If you only have a single supervisor and you hot-remove it obviously all the linecards will shut down, but there is nothing stopping you doing it.

HTH

Andy
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Blackybear
  • Question
Cisco RV042G router
Replies
0
Views
70
Blackybear
Blackybear
CPM86
  • Locked
  • Question
Cisco isr 4331 with IOS and sip busy fail over to 2nd sip number on pbx?
Replies
0
Views
380
CPM86
CPM86
B
  • Locked
  • Question
Cisco IP phone 7841 8851 unable to forward all to external number
Replies
0
Views
245
badwolf1686
B
pbxcomm
  • Locked
  • Question
CISCO VG450
Replies
1
Views
612
nt8d09
nt8d09
Skip Rango
  • Locked
  • Question
how to backup cisco sg500-52p switch
Replies
1
Views
604
madwok
madwok

Part and Inventory Search

Sponsor

Back
Top