Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

What numbers are in XLST

Status
Not open for further replies.

justiz69

Programmer
May 17, 2006
16
AT
Hello. Please could anyone help me.

I try to change a number in XLST. How can i find out which numbers are in an XLST. I tried in LD 20,PRT, PRE. But where can i see the defined numbers and how can i change them?

Thank you very much
 
For example: Number 116 can call only Number 200 (XLIST 5). Now i want to redefine 200 to 136. I Don't know where i can see this Number 200 and how to change it.
Thanks for help because Meridian1 is new for me.
 
Not sure what you mean by number 116 - xlst's are for 0-9 and are programmed and printed as scl's in ld 20
 
When PRT PRE you will get which SCL list is assign to which XLST.
Then PRT SCL and the SCL number found above will gives you which number is assign to which digit
 
Thank you very much for your help. That's it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top