Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

What is the system parameter that a 3

Status
Not open for further replies.
g6udx

g6udx

Technical User
Joined
Oct 15, 2002
Messages
56
Location
GB
What is the system parameter that allows the MMI "delete" format to be changed. The "\" ket can either completely delete errored input or cause the errored input to be replicated enclosed within brackets thus LACD(DCA)EX.
 
Sort by date Sort by votes
SPATM Type of device used as maintenance terminal. (0 = Standard teletype/service printer - default, 1 = ANSI compatible VDU)

SPATR Type of device used as the remote terminal. (0 = Standard teletype/service printer - default, 1 = ANSI compatible VDU)

SPATC Type of device used as customer terminal. (0 = Standard teletype/service printer - default, 1 = ANSI compatible VDU)

Set the above parameters to a value of 1. You must log off and then back in for the change to become effective.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

t3rm3y
  • Locked
  • Question Question
ISDX sip trunk amend contact header?
Replies
0
Views
765
t3rm3y
t3rm3y
Steve5512
  • Locked
  • Question Question
Local assistance needed for a Realitis DX150E Dual Processor
Replies
1
Views
523
Steve5512
Steve5512
Grant_H
  • Locked
  • Question Question
Identifying analog lines
Replies
6
Views
973
sbcsu
sbcsu
alfasud
  • Locked
  • Question Question
Herma file missing on dual processor system
Replies
5
Views
739
alfasud
alfasud
sbcsu
  • Locked
  • Question Question
RPG LPG SPEDI Pickup Group between iSDX and HiPath 4000
Replies
1
Views
577
sbcsu
sbcsu

Part and Inventory Search

Sponsor

Back
Top