What is the command to see the ports? 2

[AvayaHelp]

I have an S8710 and need to change the port type for all the port connections to the Octel. Does anyone know the command to do this?

Self taught on S8700 & S8710 v2.2/CMIV/Octel 250/CMS v12/Intuity AUDIX/IP Agent/VoIP/Programming
==========================================================
Does anyone have a quarter, I need to make a phone call?

 

[telcomwork]

Typically they are stations so if this is the scenerio your delaing with just cha st xxxx

 

[orypecos]

If you don't know the station extention, do 'list hunt' and look for the hunt is called 'octel' or 'voice mail'. Then do 'display hunt ' and the number of the hunt group. Then 'change station xxxx for each of the members.

Da-vi'do Juan-is'imo
P.S. For the best response to a question, read FAQ222-2244. Also give the type & version of your voice mail & pbx & preview your post to make sure it is complete & understandable. Please answer all questions so that I may have the info to assist you. Leaving a post on how you fixed the problem will also be appreciated.

 

[AvayaHelp]

Hey orypecos

I need to change the Octel ports from 7405D to 7405ND but when I try this I get an error: Numerical Terminal Display Featurs is not activated.

What do I need to do get that active, call Avaya and give them my first born ?

Self taught on S8700 & S8710 v2.2/CMIV/Octel 250/CMS v12/Intuity AUDIX/IP Agent/VoIP/Programming
==========================================================
Does anyone have a quarter, I need to make a phone call?

 

[Spookytooth]

try "change system-parameters features" up around page 5 or so

 

[AvayaHelp]

Spookytooth thanks that did it. Now I am told I need the same feature turned on in the Octel 250. Anyone know how to do that?

Self taught on S8700 & S8710 v2.2/CMIV/Octel 250/CMS v12/Intuity AUDIX/IP Agent/VoIP/Programming
==========================================================
Does anyone have a quarter, I need to make a phone call?