What happen here???? Access Point logs

[reliancetech]

Please see attached logs of AP 1200. The customer told us that they got all clients of AP disconnect and connect back.

Casn some one explain what might have happend


*Mar 1 00:00:04.525: soap_pci_subsys_init: slot 3 found radio
*Mar 1 00:00:04.826: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Mar 1 00:00:05.857: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
*Mar 1 00:00:06.903: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
up
*Mar 1 00:00:07.201: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:00:07.201: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(13)JA3, EARLY DEPLOYMENT RE
LEASE SOFTWARE (fc1)
Technical Support:

http://www.cisco.com/techsupport

Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 20-Feb-04 17:21 by kellythw
*Mar 1 00:00:07.202: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a c
old start
*Mar 1 00:00:07.903: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to up
*Mar 1 00:00:08.148: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to up
*Mar 1 00:00:10.339: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Do
t11Radio0, changed state to down
*Mar 1 00:00:16.357: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2452
selected
*Mar 1 00:00:16.377: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:17.358: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to up
*Mar 1 00:00:17.473: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0090.4b7f
.6124 Associated KEY_MGMT[NONE]

 

[leedsit]

Hi,

Do a "show version", how long has the Device been up??
Looks like it may have rebooted. Post the "show version" and it should give us a clue to why is restarted .

LEEroy
MCNE6,CCNA2,CWNA, Project+

 

[reliancetech]

Yes I missed that ...

ap>sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(13)JA3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Technical Support:

http://www.cisco.com/techsupport

Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 20-Feb-04 17:21 by kellythw
Image text-base: 0x00003000, data-base: 0x0053CEA4

ROM: Bootstrap program is C1200 boot loader
BOOTLDR: C1200 Boot Loader (C1200-BOOT-M) Version 12.2(8)JA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

ap uptime is 5 hours, 13 minutes
System returned to ROM by power-on
System image file is "flash:/c1200-k9w7-mx.122-13.JA3/c1200-k9w7-mx.122-13.JA3"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-AP1230B-A-K9 (PowerPC405GP) processor (revision B0) with 14326K/2048K bytes of memory.
Processor board ID FOC08122SVK
PowerPC405GP CPU at 196Mhz, revision number 0x0145
Last reset from power-on
Bridging software.
1 FastEthernet/IEEE 802.3 interface(s)
1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0F:90:2A:3A:5A
Part Number : 73-8704-07
PCA Assembly Number : 800-23211-08
PCA Revision Number : A0
PCB Serial Number : FOC08122SVK
Top Assembly Part Number : 800-23304-07
Top Assembly Serial Number : FHK0814J25L
Top Revision Number : B0
Product/Model Number : AIR-AP1230B-A-K9

Configuration register is 0xF

 

[leedsit]

Hi,

looks to be a power issue rather than a crash. Id write this one off to a brownout or something along those lines.

Lee

LEEroy
MCNE6,CCNA2,CWNA, Project+

 

[reliancetech]

But what are these lines in the log indiacates


Mar 1 00:00:04.525: soap_pci_subsys_init: slot 3 found radio

*Mar 1 00:00:07.202: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a c
old start

Mar 1 00:00:16.357: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2452
selected

 

[leedsit]

Hi,

not familiar with Cisco AP`s, however these look like normal startup logs when each service or App initialises. If you reboot the AP again, you should get the same logs.

LEEroy
MCNE6,CCNA2,CWNA, Project+

 

[reliancetech]

ok .. thank you ..let me see rebooting one AP. .. I will pos the output then

 

[MTandSAV]

indeed looks like a reboot...you do your logs on daytime so you know when this happened.

CCNA, CCNP..partly