Hello,
We have a Watchguard Firebox III at our main site, which hosts a financial application behind a terminal server. A very important remote site is being brought up, and will have 2 DSL connections from different ISPs. They are going to buy a Cisco router with VPN accelerator card as the VPN endpoint on their end. We would like to setup the VPN tunnels to load balance and dynamically failover (best solution), hot-failover without disconnecting users (good solution) or cold failover (least-desireable solution). Has anyone encountered this situation before and have any recommendations? I'm not so sure the Firebox can handle this, but I'm hopeful.
Thanks a bunch!
--Karl
We have a Watchguard Firebox III at our main site, which hosts a financial application behind a terminal server. A very important remote site is being brought up, and will have 2 DSL connections from different ISPs. They are going to buy a Cisco router with VPN accelerator card as the VPN endpoint on their end. We would like to setup the VPN tunnels to load balance and dynamically failover (best solution), hot-failover without disconnecting users (good solution) or cold failover (least-desireable solution). Has anyone encountered this situation before and have any recommendations? I'm not so sure the Firebox can handle this, but I'm hopeful.
Thanks a bunch!
--Karl