Weird ring on T7406

[alycera]

Hi Folks,

A while back I installed a T7406 cordless on a MICS system. There seems to be a ring pattern conflict that results in the cordless ringing VERY long -- almost continuous until the call is answered. I assume the system is sending out a different pattern than the phone and that the two are overlapping. I've groped with various ring patterns to no avail. Any suggestions?

 

[curlycord]

Could be defecteive set.
Try re-programming and make sure cordless is within range because if it is too far away strange things will happen.

http://www.spoctel.com

 

[mikescience]

I just had this happen. I installed a T7406, programming is good. It worked great until they gave it to a lady that likes to press buttons. Ever sense then it rings almost continuouly. Is it a secret code, cause its not RING TYPE, RING VOLUME or anything in the book.

Thanks,
MikeScience