Weird Call Forwarding Issue 2

[BuckWeet]

Okay, here's a weird one (least I think so)

When I do a FAC code to do call forwarding to a remote station on the DCS network, it picks up that trunk group for the group to get to that station..

For example, the station I want to forward to is 3222

so I do a #2223222, and by doing a list trace station 6517 I can see it picks up the trunk group... Doing this feature by a dss button works, but why not by donig it via FAC? CF All = #222 CF BUSY/DS = #111... the #111 does the same thing.. I've tried changing the FACS to like 7777 and it does the same exact thing..


I'm baffled, you guys have any thoughts?


Thanks

BuckWeet

 

[Ronster]

Could it be the COS of the station limits the call-forwarding access?
Try changing the following COS fields:

 Restrict Call Fwd-Off Net      
 Call Forwarding Busy/DA        
 Personal Station Access (PSA)  
 Extended Forwarding All        
 Extended Forwarding B/DA

 

[BuckWeet]

Ahh, it was a COS issue, it turns out my COS has Console Permissions and thats what was causing the problems.

Weird...


BuckWeet