Watchguard mobile user vpn and pix firewall

[nortelfan]

Has anyone had success configuring the watchguard mobile user vpn to connect to a pix firewall and receive a predefined ip address?

I have an initial phase one authentication, but cannot get an ip assigned. I have posted messages on the watchguard forum, but I think the pix firewall setup is the part that is hurting me the most.

Any help would be most appreciated.

 

[yizhar]

HI.

I don't know of a way to give specific VPN client predefined IP address by user, other then using a dedicated "ip local pool" and a dedicated "vpngroup" for that specific user.
I also know nothing about the watchguard client - why not using the Cisco VPN client?


Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar

 

[nortelfan]

All of my primary sites use watchguard firewalls and my mobile users are having no problems. I have a few users that now need to connect to another site that uses cisco pix. I don't want to connect that site to my sites through the firewall's themselves and have been told that the mobile user software from watchguard can connect to a cisco pix. I am just not sure where my problems is since I can only get past phase 1 of authentication.

Thanks