Sorry for the late reply, but this problem has been interesting for my colleague who was on site.
I visited another of the customer,s BCM sites and checked the current patching level. I could see that System patch 028 WAS going to be applied, but got deleted. It was never installed!.
To make matters worse, my colleague had installed Element Manager on the same RCC to access the BCM system and he could only see old patches installed such as System 024 etc. It was only when he connected using his own laptop to the same BCM via LAN2 that he could see the latest System 028 etc!.
I decided last week to load in System 028 via the customer's network on the Element Manager that I was using and I had scheduled it for last Monday morning.
The patch was applied and no problems reported except for the continuning slow IP View and Wallboards etc.
Please read my colleague's next course of action as we now know it to all be down to the customer's RCC.
I think he has done a very useful guide?.
Hi all
After numerous attempts to get this working I am glad to say that it all up and working ok at present.
A few bits of information regarding this.
It looks like when the uninstall of files from the folders i.e. Nortel and SQL were removed some of the information tended to stay in the computers registry so every time an install was attempted there were conflicts with this which was a difficult issue to pinpoint.
When I loaded BCM Element Manager from the BCM onto the RCC server I could open it and see different information via this one from when I connected directly via the BCM. The information when I connected directly to the BCM was accurate as opposed to that on the RCC. I was using the same version of Element Manager on both the RCC server and the BCM along with the same version of Java. This was confusing to start with but was eventually what led me to think there was an issue on the RCC server itself and not the BCM.
The BCM is currently patched up-to-date with the latest service update, the latest desktop patch and the RCC/Ipview are running the latest versions also.
All information was loaded onto the RCC server i.e. the users, settings etc manually, but as the PC was old and very slow to download and run anything took ages. The database was still downloading when. I left site and only on 46% after 2 hours, this will take several hours via this pc.
The Ipview needs to be removed from each of the users pcs and re-installed with the latest version, this I have not done
The old RCC server needs to have the hard drive formatted and then rebuilt if it is to be used as an RCC server again,. I would recommend another newer pc be used as the RCC server and reloaded on again as the current working one is not really up to scratch and very slow, I can see issues with this if it is not replaced in the near future.
When removing RCC to do a FULL install there are a few things that should be done.
Automatic updates should be manually disabled and left in this state.
Login and disconnect from the network, stop print spooler services, stop RCC launcher.
Uninstall – Java
Uninstall – Ipview
Uninstall – RCC
Uninstall – SQL server 2005 (this will also uninstall MYSQL4 and the database)
Uninstall – BCM Monitor if present
Uninstall – BCM Element Manager if present
No files or folders should be deleted until the uninstall programs have been run, completed, and a reboot of the pc done.
Re-boot
Empty Internet temporary files and Internet offline files, no need to delete cookies or browsing history. after this any folders/files can be deleted.
Reboot while connected to the network then check the services are up ok, print spooler should be disabled while installing RCC, check all files/folders have been deleted again.
If possible and the network allows a registry cleaner may be advisable. Preferably any Antivirus, Firewalls should be disabled while downloading and installing RCC.
If loading onto a new pc ensure correct I.P. address is set on the server and that IIS components are installed.
Download RCC (preferably save into a folder created on the RCC server) and install from here, SQL server should also install and numerous reboots will be required.
RCC install verifier runs and will ask you to reboot or continue while going through the install of SQL server, Files, Database. Java, Reporting, BCM settings etc .
When RCC server is fully loaded and if needed the final reboot has taken place the database will download from the BCM and this can take a long time.
While database is downloading you can check RCC settings, IP addresses, skill sets, ports etc and if Ok then add the users etc.
Download Ipview (preferably save into a folder created on the RCC server) install from here, this can be run while the database is downloading.
When installed ensure IPview is set to echo.
Enable Antivirus and Firewall if applicable.
If all ok and database has fully downloaded reboot for the last time.
Check services and restart print spooler if it did not auto start, check RCC launcher and MYSQL4 have started.
When you are happy all is working OK the final thing is to go round each PC that uses IPview and uninstall it and reinstall it with the latest version.
I hope that you will find this to be useful?.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
