Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VTP Propagation Question

Status
Not open for further replies.
Ludoggg

Ludoggg

MIS
Oct 25, 2002
54
US
I know VTP propagates VLAN information to other servers and clients in a switched environment but my question is this, does VTP propagate switchport command configurations (i.e switchport port-security violation?
 
Sort by date Sort by votes
No dont think so... Why would u want it to?

UnaBomber
ccnp mcse2k
 
Upvote 0 Downvote
It would seem redundant to configure each if you were, lets say using the maximum, sticky or violation command.
 
Upvote 0 Downvote
VTP propogates VLAN information only between switches.

If you are interested in having the same global port security commands enabled on all switches, Ciscoworks will do this for you.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Zero6
  • Locked
  • Question
question about cisco cbs 350-12xs 12 port 10g sfp+
Replies
0
Views
340
Zero6
Zero6
Mogles49
  • Locked
  • Question
Firewall ACL question
Replies
1
Views
278
burtsbees
burtsbees
mkc1962
  • Locked
  • Question
Cisco 2602e connection question
Replies
0
Views
168
mkc1962
mkc1962
azrael2000
  • Locked
  • Question
quick question...re layer 3 with routing
Replies
1
Views
265
chieftan
chieftan
lwhalo
  • Locked
  • Question
ASA 5520 Packet Capture Question
Replies
0
Views
187
lwhalo
lwhalo

Part and Inventory Search

Sponsor

Back
Top