VPN, what if Power Fails on one site

[dacafaca]

If two IP500 are connected in SCN via Juniper routers across the internet,and we have VPN phones on other locations connected to these IP500, what can we do if power fails on one IP500?

Whether the phone can automatically reconnect and register to another IP500?? Can we setup this in vpn software?

May be able with the new 96xx phones that will soon come out for IPOffice with built-in VPN software?

 

[tlpeter]

With version 5 you can have ip phones register on the other location.
Of course your VPN must still be working !




ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[dacafaca]

How, if the phones are registered at site A, how they can re-registered to site B automatically if power fails on IPO site A?

Do you have some manuals of this?

Thanks!

 

[TomMills]

it just needs to be programmed correctly. read the version 5 release notes and help files, it's all in there.

http://www.twitter.com/tem1985

See what my brain does when it's not thinking about phones.

 

[tlpeter]

This is documented in the techbulletin that belongs to 5.0.8

ftp://ftp.avaya.com/incoming/Up1cku9/tsoweb/ip_office/Global_IP_Office_Technical_Bulletin_Number_109.pdf




ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[dacafaca]

Thank you very much!!

Best Regards!

 

[hairlessupportmonkey]

please ask your boss to send you on some IP Office training!