Hi Everyone! I'm setting up a VPN over ADSL between 3 remote sites using PIX501 Firewalls. All 3 sites have their own Windows NT4.0 Domains. I can ping all 3 PDC's remotely (From the other LAN's) but if I try to ping any WIndows 9x clients from a remote LAN I get Request Timed Out. (All Windows 9x clients can ping the other two servers not on their LAN!) For a short term fix I have installed IIS on all Servers and everyone is transferring data over FTP but I think I'm right in saying that I should be able to get this working over SMB. DO I need to establish trusts between the domains? or am I barking up the wrong tree? Any help would be appreciated. Thank you in advance
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VPN Using PIX501
- Thread starter ppuddick
- Start date
bwilliam13
IS-IT--Management
You need to provide MUCH more info, like ip addresses, subnet masks, etc. If you want client PC's from other LANs to be able to connect to remote PDCs, short answer is 'yes, you need to have trust relationships between those servers.' But you need to provide a lot more information for an accurate diagnosis/fix of the problem.
- Status
Similar threads
- Locked
- Question