Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VPN through Microsoft Proxy???
- Thread starter jermocide
- Start date
If you have MS Proxy 2.0 installed and have a static IP address from your ISP, you halfway there. Install and configure RAS, set up your VPN's on the server side. Install Microsoft VPN on client side and configure. Have client dial up there ISP, launch the VPN that points to Proxy, and you should be in. Check out MS's site for "VPN", "RAS", "Proxy Server".
Guest_imported
New member
- Jan 1, 1970
- 0
I've got to do this also; please see below and advise:
>
> I've got a client with DSL running into a Proxy Server with an External
> address, then my internal network is setup on 10.0.0.x - I need to use VPN
> to access my NT Domain Server (on 10.0.0.x) and need to know how I configure
> the client to get through the Proxy Server's live IP address and into the NT
> Domain Server - please advise as I've hit the wall on this one!!
>
> --
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Ted Clouser, MCP
> Director of Operations
> PC Assistance, Inc.
> > clousert@pcassistance.com
>
>
>
>
>
> I've got a client with DSL running into a Proxy Server with an External
> address, then my internal network is setup on 10.0.0.x - I need to use VPN
> to access my NT Domain Server (on 10.0.0.x) and need to know how I configure
> the client to get through the Proxy Server's live IP address and into the NT
> Domain Server - please advise as I've hit the wall on this one!!
>
> --
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Ted Clouser, MCP
> Director of Operations
> PC Assistance, Inc.
> > clousert@pcassistance.com
>
>
>
>
- Status
Similar threads
- Locked
- Question