Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VPN Phone with Watchgaurd 1

Status
Not open for further replies.

raknas

Technical User
May 4, 2004
276
GB
Has any one successfully configured a VPN phone with any of the Watchguard Firebox X10e/20e/55e range of firewalls? If so have you any application notes.

Thanks inadvance
 
we have with the X550 / 750e jobbies.

VPN Phone config
Profile: Juniper Xauth with PSK
Group Name: <Group Name Here>
Group PSK: <secret here>
VPN Start Mode: BOOT
Password Type: Save in Flash
Encapsulation: 4500-4500
Syslog Server:
IKE Parameters: DH1-3DES-SHA1
IKE ID Type: USER-FQDN
Diffie-Hellman Group: 1
Encryption Alg: 3DES
Authentication Alg: SHA1
IKE Xchg Mode: Aggressive
IKE Config Mode: Enable
XAUTH: Enable
Cert Expiry Check: Disable
Cert DN Check: Disable
IPSec Parameters: DH1-3DES-SAH1
Protected Nets: xxx.xxx.xxx.xxx/xx
Copy TOS: No
File Srvr:
Connectivity Check: Always
QTest: Disable

match those with your VPN settings on your firewall and all should be good!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top