Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

vpn client is setup to allow local access to subnet 10.100.0.0/24

Status
Not open for further replies.
itstudies

itstudies

Technical User
Jul 14, 2011
3
AU
Hi guys,

I'm new to the forum and to the CISCO routers as well.

I need to know how can I set CISCO VPN client to allow local access to subnet 10.100.0.0/24?

I only know that I can log into router via putty. I have no idea how to set this up. Much appreciate your help.

Thank you.
 
Status
Not open for further replies.

Similar threads

B
  • Locked
  • Question
Cisco IP phone 7841 8851 unable to forward all to external number
Replies
0
Views
228
badwolf1686
B
CPM86
  • Question
Cisco isr 4331 with IOS and sip busy fail over to 2nd sip number on pbx?
Replies
0
Views
368
CPM86
CPM86
Luzbel
  • Locked
  • Question
Connecting HVAC controller to network
Replies
0
Views
411
Luzbel
Luzbel
Skip Rango
  • Locked
  • Question
how to backup cisco sg500-52p switch
Replies
1
Views
577
madwok
madwok
quazimotto
  • Locked
  • Question
Cisco ASA_5505 VPN to Juniper_SRX210 VPN IS UP_ No Traffic!!!!!!
Replies
0
Views
254
quazimotto
quazimotto

Part and Inventory Search

Sponsor

Back
Top