Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VPN Client 3002 dropping

Status
Not open for further replies.
hrswift

hrswift

MIS
Sep 24, 2003
48
US
I have a VPN client 3002 router that keeps dropping in the field. The local user must power cycle this device and the VPN tunnell is established again. It goes down about every 5 to 10 minutes. Is there anything I can do to keep this from happenning?

Thanks in advance
 
Status
Not open for further replies.

Similar threads

quazimotto
  • Locked
  • Question
Cisco ASA_5505 VPN to Juniper_SRX210 VPN IS UP_ No Traffic!!!!!!
Replies
0
Views
243
quazimotto
quazimotto
tviman
  • Locked
  • Question
Same subnet on each side of a VPN 1
Replies
2
Views
251
tviman
tviman
DigitalG
  • Locked
  • Question
cisco rv180 vpn tunnel between a rv130
Replies
0
Views
200
DigitalG
DigitalG
thad100g
  • Locked
  • Question
Can connect using Cisco VPN Client but cannot connect to statically mapped
Replies
0
Views
162
thad100g
thad100g
napoleao
  • Locked
  • Question
IPSec VPN
Replies
3
Views
300
napoleao
napoleao

Part and Inventory Search

Sponsor

Back
Top