I'm trying to build a VPN tunnel between 2 Netscreen one in NAT mode and the other in Transparent mode. I've add the two static routes in the Netscreen with transparent mode as the netscreen knowledge base instructed, and configured both netscreens but still cannot get the VPN to work. I'm able to built the VPN tunnel when both of the netscreen is in NAT mode. Anyone have ideas?? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VPN between NS in Transparent mode and NS in NAT mode
- Thread starter jay208
- Start date
Hey,
I would debug the L2(transparent) Netscreen using:
set ffilter src-ip x.x.x.x (ip of remote Netscreen)
set ffilter src-ip x.x.x.x (ip of remote test machine)
debug flow basic
clear db
<test - ping, etc...>
undebug all
get db str
Check to see if the debug gives you more info. If you want, paste the contents here and xx out IP info (sensitive). Hope you find this helpful.
Rgds,
John
I would debug the L2(transparent) Netscreen using:
set ffilter src-ip x.x.x.x (ip of remote Netscreen)
set ffilter src-ip x.x.x.x (ip of remote test machine)
debug flow basic
clear db
<test - ping, etc...>
undebug all
get db str
Check to see if the debug gives you more info. If you want, paste the contents here and xx out IP info (sensitive). Hope you find this helpful.
Rgds,
John
- Status
Similar threads
- Locked
- Question
