VPN between Cisco 515 at Main Office to Branch using 505..using Cable

[thegirlofsteel]

Hello,

I am in an unfortunate situation with a branch office of mine not able to connect to the internet using DSL. My only choice is Cable. (Mediacomm)

I have a Pix 515 in the main office and trying to connect to another office that uses a PIX 505. I am having difficulty trying to get the cable company from keeping my IP static. Is there something I can do.

 

[thegirlofsteel]

I am still having difficulties with the internet connection. According to Cisco, they said the cable modem should only have 1 static IP. Then through the router, the other PC's will be placed on that networks IP address scheme. I did this and it still doesn't work.

Any suggestions?

 

[themut]

You need to use the EZVPN feature on the PIX firewall. The link below will help you achieve this task:

http://www.cisco.com/en/US/products...s_configuration_example09186a008019e6d7.shtml

Hope this helps!