Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Voip on Md110
- Thread starter Chamvari
- Start date
You will probably need to be on at least BC12 (I think - possibly BC13). You will need an ELU32 (or more dependent on your requirements) in the system to provide IP connectivity.
I'm not sure about the Patton gateway. Is this H.323 or SIP?
I know that the MX-ONE can do SIP trunking and think that the MD-110 can also do this but I'm not sure. I know that the MD-110 can have SIP extensions so I guess trunking is possible.
Lee Mason
Optimal Projects Ltd
I'm not sure about the Patton gateway. Is this H.323 or SIP?
I know that the MX-ONE can do SIP trunking and think that the MD-110 can also do this but I'm not sure. I know that the MD-110 can have SIP extensions so I guess trunking is possible.
Lee Mason
Optimal Projects Ltd
Hi Petros
We tried years ago to interconnect an MD100 BC12 and ipLDK-100 version 3.0, but gave up as there were problems with CODEC negotiations (G.711, G723). The call setup failed due to these problems.
Maybe these problems are solved now?
///doktor
We tried years ago to interconnect an MD100 BC12 and ipLDK-100 version 3.0, but gave up as there were problems with CODEC negotiations (G.711, G723). The call setup failed due to these problems.
Maybe these problems are solved now?
///doktor
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
