Voice Networking

[Gigaic]

I have a 61C which needs to connect to two Nortel Matra systems over a WAN. I guess I need an E1 in the 61C to connect to an E1 in the Cisco router system at the 61C site and then get FXO/FXS cards (4 or 8 ports) in the Cisco routers at the Matra sites to connect to analogue trunks on the Matra.

Any documentation on programming this both on the Nortel side and the Cisco side will be much appreciated.

Thanx
George

 

[johnpoole]

i can post the american flavor of a qsig to a bcm if that will help.. ours works with msg lamps names etc. the only thing i had to do was change the ncos of the trunks so cisco users would get an auth code request for ld

john poole
bellsouth business
columbia,sc

 

[Gigaic]

Hi John,
Please post the BCM Qsig. If anyone has one for the Meridian 1, that will be very helpful.

Thanks
George