VM Pro Post Dial Action to paging

[jgraham1075]

Does anyone know if the 'Post Dial' action in VM PRO 4.2.30 will no longer allow short codes? We use to use a short code of *108 that would dial our external paging system and play a wav file over it when calls were holding in queue, but this seems to no longer work on 4.2

We can't use 'PAGE:' as we want to page over the loudspeakers and not phones.

It works if I put in a valid extension number (it rings that phone) but if I put in a short code or the code for dialing the paging system - nothing happens.

Worked fine previously but now I cannot get it to work.

 

[TomMills]

try changing the shortcode to 108 without the star or something else that doesnt begin with a star or a #

"There's a dog in the New Zealand section

 

[Bas1234]

Indeed * or # don't work, used is 2 weeks ago for a doktor.

Created a module called PAGE connected to a Menu (1,2,3,0) 1,2,3 where connected to a Post dial and the 0 was connected to a transfer option 108 (page SC)

They played wav 1, 2 or 3 in the waitingroom (next patient to room 1, 2 or 3) or used 0 for normal Paging.

The SC was *90/PAGE/Voicemail Collect.

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________