VM Pro multiple test condition?

[rollfig]

Hello everyone, i`m trying to create a multiple test condition for one of my customer..
The scenario look like this....., there is 4 staff member on duty every weeks of the month..
(example)
Staff #1 is on duty Thursday 14/03 12PM until next Thursday 21/03 12PM,
and then
Staff #2 is on duty from Thursday 21/03 12PM until next Thurdays 28/03 12PM
and
Staff #3 is on duty from Thursday 28/03 12PM until next Thursday 04/04 12PM etc...etc...

So my problem is on testing the Thursday where i always have 2 staff member on that same days...
I know i just miss a little something somewhere to set it right, any helps will be appreciate!!
Thanks

 

[amriddle01]

But there must be a point in the day (on Thu) where the line is drawn, so on Thu check for the time and route accordingly


Avaya Implementation Qualified Professional Specialist Technical Engineer (AIQPSTE)

 

[rollfig]

Yes the time on every thursday is noon.. but when i build the calendar for each staff member,those member have the same day in the calendar, one from 00:00 to 12:00 and the other one from 12:01 to 23:59...so i the conditon i use the calendar and a week planner with an AND test?

 

[amriddle01]

No, not with an and, test it separately with another test condition action


Avaya Implementation Qualified Professional Specialist Technical Engineer (AIQPSTE)