VLAN/Trunking setup on 2651 Router

[techie211]

hey ppl, I have a 2651 router and 2 2950 switches. I'm learning about vlans and trunking and would like to know how to set this up or even if the equipment I have is capable to handle this setup. I'm trying to simulate this setup.

2 - Win2k3 servers(one on int fa0/1 and one on int fa0/2)
1 - WinXP workstation
2 - seperate vlans, one for each server(but they have to see each other)
the servers will supply ip's via DHCP to the WinXP workstation.

Need to create two seperate vlans -- vlan100 and vlan200
Need to be able to plug a workstation to the switch and have it pick up an ip.

a step by step on this or a helpful link would help lots

 

[vipergg]

http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a00800949fd.shtml

 

[techie211]

thanks for the link