Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vlan 4510

Status
Not open for further replies.
ulbe

ulbe

IS-IT--Management
Joined
Oct 25, 2005
Messages
1
Location
NL
Hello all,

I have the following problem:

We have 2 4510 with supervisor V 10GB cards. Those 2 10 GB links are channeled. We have two vlan but it seem we are not able to connect the ip address on the other switch in the same Vlan.

Any one suggestions?

thanks
 
Sort by date Sort by votes
would have to see the configs . Things to check , make sure the the connecting ports are in the same vlan . Make sure you have a layer 2 and a layer 3 vlan definition for each switch, have to be in the same subnet with the same mask. An etherchannel will only pass 1 vlan ,if you need more than 1 then you need to setup trunking across those links as well.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

cheikhdtn
  • Locked
  • Question Question
VLAN
Replies
3
Views
390
iggsterman
iggsterman
mikey789
  • Locked
  • Question Question
Can 4000-M Routing VLANs ?
Replies
0
Views
259
mikey789
mikey789
netguy2000
  • Locked
  • Question Question
C2960TTL multiple Trunk ports with same VLAN
Replies
1
Views
334
chieftan
chieftan
chieftan
  • Locked
  • Question Question
Strange VLAN issue
Replies
1
Views
331
chieftan
chieftan
napoleao
  • Locked
  • Question Question
Access List Vlan
Replies
5
Views
503
napoleao
napoleao

Part and Inventory Search

Sponsor

Back
Top