Virtual Station & Coverage remote 1

[sstansf]

I'm trying to perform Coverage remote function to a cell # from a virtual station.
I have setup (and works)the following:
Sta Type 4620
COS 10
cov path 475
Y to all for coverage criteria.
Coverage Points
Point1 r30
Remote Call Coverage Table
30: 91xxxaaazzzz
Call Connects
THIS WORKS!!

The following does NOT work
Sta Type VIRTUAL
COS 10
cov path 475
Y to all for coverage criteria.
Coverage Points
Point1 r30
Remote Call Coverage Table
30: 91xxxaaazzzz
Receive intercept tone (wave off), Call does NOT complete.

How can I accomplish this simple task?? Where am I not configuring something?

 

[texeric]

Does an X-ported station produce the same result as your virtual station for you?

 

[AvayaTier3]

what is the COR?

list trace station xxxx and post here for the failure



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
Avaya. Too little or no help? Expensive?
For FAST switch support at bargain rates, give bsh a call.

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[sstansf]

The COR allow sor international dialing

Heres the Trace for the sta sta FAILS
time data
14:05:29 Calling party station 56655 cid 0x2874
14:05:29 Calling Number & Name 56655 Stansfield, S
14:05:29 dial 56604
14:05:29 redirect station 56604 cid 0x2874
14:05:32 coverage-path 475 point 1 cid 0x2874
14:05:32 denial event 1751: No AAR/ARS route pat/pref D1=0x82ab D2=0xc1c0019
14:05:32 dial 9181 route:ARS
14:05:32 denial station 56655 cid 0x2874
14:05:35 idle station 56655 cid 0x2874

Heres the station that COMPLETES. SAME COR as previous
time data
14:05:29 Calling party station 56655 cid 0x2874
14:05:29 Calling Number & Name 56655 Stansfield, S
14:05:29 dial 56604
14:05:29 redirect station 56604 cid 0x2874
14:05:32 coverage-path 475 point 1 cid 0x2874
14:05:32 denial event 1751: No AAR/ARS route pat/pref D1=0x82ab D2=0xc1c0019
14:05:32 dial 9181 route:ARS
14:05:32 denial station 56655 cid 0x2874
14:05:35 idle station 56655 cid 0x2874
14:07:37 Proceed trunk-group 5 member 49 cid 0x28cc
14:07:39 Alert trunk-group 5 member 49 cid 0x28cc
14:07:39 active trunk-group 5 member 49 cid 0x28cc
14:07:41 idle station 56655 cid 0x28cc

 

[AvayaTier3]

Denial event 1751 No route pattern or preference translated

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
Avaya. Too little or no help? Expensive?
For FAST switch support at bargain rates, give bsh a call.

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[sstansf]

Sorry, I posted twice for the same station.
Here's the one that works with the same COR and COS.
time data
14:32:12 Calling party station 56655 cid 0x2cc5
14:32:12 Calling Number & Name 56655 Stansfield, S
14:32:12 dial 56603
14:32:12 redirect station 56603 cid 0x2cc5
14:32:15 coverage-path 475 point 1 cid 0x2cc5
14:32:15 dial 91818714 routeREFIX|FNPA|ARS
14:32:15 redirect trunk-group 5 cid 0x2cc5
14:32:15 dial 918187141478 routeREFIX|FNPA|ARS
14:32:15 route-pattern 3 preference 1 location 1 cid 0x2cc5
14:32:15 seize trunk-group 5 member 52 cid 0x2cc5
14:32:15 Setup digits 18187141478
14:32:15 Calling Number & Name NO-CPNumber NO-CPName
14:32:15 G729A ssff ps:20
rgn:46 [10.82.56.152]:2712
rgn:1 [10.107.30.234]:3216
14:32:15 Proceed trunk-group 5 member 52 cid 0x2cc5
14:32:17 Alert trunk-group 5 member 52 cid 0x2cc5
14:32:17 active trunk-group 5 member 52 cid 0x2cc5
14:32:20 idle station 56655 cid 0x2cc5

 

[Tolson]

It shows that you do not have a location table selected, that is why you are getting wave off on the failed call. Try changeing the ars table for location all for the one number you are trying to forward to "91818...." then give it a try.

 

[sstansf]

Tolson - If it was the ARS table as suggested, why does the call COMPLETE with a non virtual ext?
Im trying to make this work with a VIRTUAL station.

 

[Tolson]

The non virtual station is located within a "location" and is able to follow the ARS rules for that location. Your trace shows that there is no rule how to route the call to the number that you are trying to dial.

 

[sstansf]

Thank you Tolson!! That explained it!!
Also as a side note...
Virtual stations use ARS location ALL!!