Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Virtual-access interface

Status
Not open for further replies.
csross

csross

MIS
Joined
Dec 21, 2003
Messages
92
Location
US
I upgraded my router to support fast ethernet and fix a security bug that cisco announced. I am running c3640-ik8o3s-mz.122-15.T12. After I upgraded there is a new interface that I am not familiar with, a Virtual-access interface. I read that it has to do with ppp connnections, although I do not have any dial-in/out lines. I do have 2 T1 lines and don't want this possibly allowing some way to get into my network.

If I try and access the interface to issue the shutdown command, it gives a message that I have to configure the interface via the template.

Is there any way to shut this interface or remove it?

thanks

 
Status
Not open for further replies.

Similar threads

PThomp3344
  • Locked
  • Question Question
Trying to connect to Cisco Unified Controller web interface: UC520W-16U-4FXO-K9
Replies
1
Views
685
nt8d09
nt8d09
CDIV
  • Locked
  • Question Question
Use uplink port as access port 2960
Replies
9
Views
1K
CDIV
CDIV
CDIV
  • Locked
  • Question Question
How do I enable SSH access in 2960x
Replies
4
Views
1K
iggsterman
iggsterman
dmourghen
  • Locked
  • Question Question
PBR issue and Access-list
Replies
0
Views
356
dmourghen
dmourghen
mrdom
  • Locked
  • Question Question
RV325: Accessing LAN and WAN resources using the same hostname ...
Replies
0
Views
327
mrdom
mrdom

Part and Inventory Search

Sponsor

Back
Top