Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Viewing connections
- Thread starter Callahan
- Start date
If you want a realtime view, you can use the 'show interface' IOS command. This command usually gives you the average utilisation over the last 5 minutes for the port in question.
If you need capture and present utilisation over time, a lot of people use a product called MRTG which is free but can be complex to setup. You can download it as follows:
If you need capture and present utilisation over time, a lot of people use a product called MRTG which is free but can be complex to setup. You can download it as follows:
- Status