Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VG200 with IP telephony for scholl intercom system

Status
Not open for further replies.

frenchmen

Technical User
Joined
Sep 23, 2002
Messages
2
Location
CA
Hi

I Have school intercom system that use CO-TRUNK on old PBX phone system.

They will take out those PBX system and replace them with a new Cisco IP phone system.

A call Manager will be used.

They told me that they will connect my system to theres via a VG200 router with FXO module.

My question is that my system is providing power to the PBX CO-TRUNK now and i think the FXO module are providing power for an ordinary fax or interrac machine will it work or they would need FXS module VIC-2FXS to make it work.

Thanks in advanced
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top