[Veritas NetBackup 5.1] Staging -> How To / FAQ? 1

[ITpower]

Hello All,
I´m from Germany and new, so that´s my first thread..

Is there a FAQ or How To, which describes how to set up a NetBackup Staging environment correctly (Staging: Disk to Tape)? -Yes, I searched already.

I´m thankful for any help....

 

[GreyWanderer]

Here is a technote for design consideration. There is a link in it to the Admin guide as well. You did not specify OS...but there is quite a bit of info on the veritas support site. Hope it helps....

http://support.veritas.com/docs/270101

 

[syjl]

The design doc is helpful but won't get you set up. Do you need more help or do you understand the concept?

 

[ITpower]

At first thanks for the replys!

As thsyjl wrote, I know the concept, put a design-template won´t show me a best practise.. And I need something like this to set up an evaluation-environment for an upcomming project.

Would be great if you have any more helpful stuff!

 

[ITpower]

Sorry, I forgot to describe the environment:

Master and Media server: Linux,
Clients to backup: W2K3

I´m also running some Bare Metal Restore tests on them..