Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Verify very slow HP Ultrium 1

Status
Not open for further replies.
BlowIT

BlowIT

IS-IT--Management
Mar 7, 2002
12
A backup with the HP Ultrium library has a thoughput of 1200MB/Min on the local server. If I do a verify (scan media contents), it's throughput is only 24MB/min.
 
Sort by date Sort by votes
It's just a CRC check. The hardware is a CPQ DL380. The Ultrium is connected to the embedded Smart Array controller 5i
Bart
 
Upvote 0 Downvote
You should not have your tape drive off of the raid controller. Spend a couple hundred bucks for good scsi controller and you will see a huge speed increase.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Kennymc
  • Locked
  • Question
HP 448 uthrium driver
Replies
0
Views
640
Kennymc
Kennymc
Shiv0202s
  • Locked
  • Question
Arc serve - The status of TAPE in HP-Ultrium drive shows as "UNREADABLE MEDIA"
Replies
0
Views
229
Shiv0202s
Shiv0202s
mzancz
  • Locked
  • Question
Arcserve 16.0 and HP Storeonce 4500
Replies
0
Views
187
mzancz
mzancz
Shiv0202s
  • Locked
  • Question
The Status of Tape in hp-ultirum drive shows as Unreadable Media
Replies
0
Views
206
Shiv0202s
Shiv0202s
dekkar
  • Locked
  • Question
R16 backup jobs start fast, then gradually slow down to a crawl
Replies
0
Views
124
dekkar
dekkar

Part and Inventory Search

Sponsor

Back
Top