I have worked with Crystal reports and know that I can pass vb variable information into Crystal. I there any way to do that with Brio. For example say I have 10 people and I want only one person's information to show. So I can pass a Name(or Number)ie. Bubba Jones to Brio and it will only report on Bubba Jones information. Any help on how to deal with Brio Reports from VB would be great. thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VB and Brio
- Thread starter twolver
- Start date
I would expect to specify a parameter such as
ask NumberID
I would then expect to use it by including the parameter for {NumberID} when the Brio Report is called.
SQR myreport.sqr connectivity flags 78
where 78 is the required value for NumberID
I hope this helps, At least with the Brio side of things. I am only new to Brio myself.
ask NumberID
I would then expect to use it by including the parameter for {NumberID} when the Brio Report is called.
SQR myreport.sqr connectivity flags 78
where 78 is the required value for NumberID
I hope this helps, At least with the Brio side of things. I am only new to Brio myself.
- Status
Similar threads
- Locked
- Question
- Locked
- Question